The CADWorx Plant commands listed below no longer have buttons on the user interface. The commands still work, but they must be typed into the Command Line.
|
Command Name |
|
|
|
Weld Size - Sets the default size of the weld dots that accompany single line components. For more information, see Weld Size. |
WELDSIZE |
|
|
Join Pipe - Changes segmented piping to non-segmented piping. For more information, see Join Pipe. |
JOINPIPE |
|
|
Break Pipe - Changes non-segmented piping to segmented piping. For more information, see Break Pipe. |
BREAKPIPE |
|
|
Tap Connection - Creates tap connections for use by Isogen. For more information, see Tap. |
TAP |
|
|
Offset Tap - Creates offset tap connections for use by Isogen. For more information, see Offset Tap. |
OTAP |
|
|
Set OTAP SKEY - Sets an SKEY for the selected OTAP. For more information, see Set an OTAP SKEY. |
SETOTAPSKEY |
|
|
Nozzle Generic Attach - Attaches nozzle information to any generic CAD platform object in the drawing. For more information, see Nozzle Generic Attach. |
ENGENERIC |
|
|
Change Elevation - Changes the elevation of a selected pipe in the drawing. For more information, see Change Elevation. |
CHANGEELEVATION |
|
|
Elbow Centerline - Turns on or off elbow centerlines for use with isometrics. For more information, see Elbow Centerline. |
ELBOWCL |
|
|
ISO Flag - Sets a flag in the component indicating that the present stored length should be used regardless of what type of length modifications are made to the pipe component. For more information, see ISO Flag. |
ISOFLAG |
|
|
Dim Adjustment - Adjusts a dimension when the pipe segments of a particular run have been adjusted or modified with the ISO flag command. For more information, see Dim Adjustment. |
DIMADJUST |
|
|
Re-associate the Components - Enables you to re-associate disconnected components. For more information, see Re-associate the Components. |
REASSOCIATEMODEL |
|
|
System Visibility - Turns on or off visibility of components usually located on the system layer. For more information, see System Visibility. |
SYSVIS |
|
|
Change Size - Changes the size of the selected components based on available sizes. For more information, see Change Size. |
CHANGESIZE |
|
|
Change Spec - Changes the specification of the selected components. For more information, see Change Specification. |
CHANGESPEC |
|
|
OrthoGen Launch - Launches the OrthoGen application. For more information, see OrthoGen Launch. |
ORTHOGENLAUNCH |
|
|
OrthoGen Out - Generates OrthoGen drawings from a script file created using the OrthoGen application. For more information, see OrthoGen Out. |
ORTHOGENOUT |
Command Line