|
|
Command Summary |
|
|
---- |
CADWORXABOUT |
About - Displays information about the software version. For more information, see About. |
|
|
CAPILLARY |
Capillary - Draws a capillary line. For more information, see Capillary. |
|
|
CEDIT |
Edit - Modifies an existing component on the drawing. For more information, see Edit. |
|
|
CHANGEATTLAYER |
Change Att Layer - Moves all attribute text in the drawing to the text layer. For more information, see Change Att Layer. |
|
|
COAUXBACK |
Computer-Auxiliary Back - Places an auxiliary back computer instrument. For more information, see Computer-Auxiliary Back. |
|
|
COAUXFRONT |
Computer-Auxiliary Front - Places an auxiliary front computer instrument. For more information, see Computer-Auxiliary Front. |
|
|
COLOCAL |
Computer-Local - Places a local computer instrument. For more information, see Computer-Local. |
|
|
COMBINEINST |
Combine Instruments - Combines instrument bubbles into a group. For more information, see Combine Instruments. |
|
|
COMBINEINSTADD |
Combine Instrument Add - Adds instruments to a group. For more information, see Combine Instrument Add. |
|
|
COMBINELINE |
Combine Lines - Combines a group of process line segments into a single process line. For more information, see Combine Lines. |
|
|
COMBINEPROCESS |
Combine Process - Combines a group of components and gives them the same process line number. For more information, see Combine Process. |
|
|
COMBINEPROCESSADD |
Add Combine Process - Adds a component to a process group. For more information, see Add Combine Process. |
|
|
COMBINEPROCESSREMOVE |
Remove Combine Process - Removes a component that is in a process group. For more information, see Remove Combine Process. |
|
|
COPRIBACK |
Computer-Primary Back - Places a primary back computer instrument. For more information, see Computer-Primary Back. |
|
|
COPRIFRONT |
Computer-Primary Front - Places a primary front computer instrument. For more information, see Computer-Primary Front. |
|
|
CREATETABLE |
Create Table - Scans a prototype or template drawing for specially formatted keywords and creates columns for each keyword in a new loop table. For more information, see Create Table. |
|
|
CURRENT |
Current Settings - Displays the current drawing settings. For more information, see Current Settings. |
|
|
DBAUDIT |
Audit - Performs maintenance functions. For more information, see Audit. |
|
|
DELETEDWG |
Delete Drawing - Deletes a drawing from the project. For more information, see Delete Drawing. |
|
|
DIAUXBACK |
Discrete-Auxiliary Back - Places an auxiliary back discrete instrument. For more information, see Discrete-Auxiliary Back. |
|
|
DIAUXFRONT |
Discrete-Auxiliary Front - Places an auxiliary front discrete instrument. For more information, see Discrete-Auxiliary Front. |
|
|
DILOCAL |
Discrete-Local - Places a local discrete instrument. For more information, see Discrete-Local. |
|
|
DIPRIBACK |
Discrete-Primary Back - Places a primary back discrete instrument. For more information, see Discrete-Primary Back. |
|
|
DIPRIFRONT |
Discrete-Primary Front - Places a primary front discrete instrument. For more information, see Discrete-Primary Front. |
|
|
DROPDOWNSETUP |
Drop Down Setup - Specifies values to appear in combo boxes for the Additional Data dialog box of Edit |
|
|
ELECTBIN |
Binary Electric - Draws a binary electric line. For more information, see Binary Electric. |
|
|
ELECTRIC |
Electric - Draws an electric line. For more information, see Electric. |
|
|
FLIPSYMBOL |
Flip Symbol - Flips a symbol and its attributes. For more information, see Flip Symbol. |
|
|
GENERATELOOP |
Generate Loops - Creates loop diagrams based on a loop table. For more information, see Generate Loops. |
|
|
GROUPADD |
Add to Group - Adds one or more component symbols to an existing group. For more information, see Add to Group. |
|
|
GROUPREMOVE |
Remove from Group - Removes one or more component symbols from an existing group. For more information, see Remove from Group. |
|
|
HEATTRACE |
Heat Traced - Draws a heat-traced line. For more information, see Heat Traced. |
|
|
HYDRAULIC |
Hydraulic - Draws a hydraulic line. For more information, see Hydraulic. |
|
|
ICONCOMPONENT |
Components - Specifies and places a vessel component, and displays a preview of the selected component. For more information, see Components. |
|
|
ICONCOMPUTER |
Computer - Specifies and places a computer instrument type and displays a preview of the selected instrument. For more information, see Computer. |
|
|
ICONCONVALVE |
Valve-Control - Specifies and places a control valve, and displays a preview of the selected valve. For more information, see Valve-Control. |
|
|
ICONCONVALVEF |
Valve-Control Flanged - Specifies and places a flanged control valve, and displays a preview of the selected valve. For more information, see Valve-Control Flanged. |
|
|
ICONCONVALVESW |
Valve-Control Socket Weld - Specifies and places a socket-welded control valve, and displays a preview of the selected valve. For more information, see Valve-Control Socket Weld. |
|
|
ICONDISCRETE |
Discrete - Specifies and places a discrete instrument type and displays a preview of the selected instrument. For more information, see Discrete. |
|
|
ICONEXCHANGE |
Exchangers - Specifies and places a heat exchanger, and displays a preview of the selected exchanger. For more information, see Exchangers. |
|
|
ICONFLANGE |
Flange - Specifies and places a flange, and displays a preview of the selected flange. For more information, see Flange. |
|
|
ICONFUNCTION |
Valves-Functions - Specifies and places a valve function, and displays a preview of the selected function. For more information, see Valves-Functions. |
|
|
ICONINLINE |
Inline - Specifies and places an in-line component, and displays a preview of the selected component. For more information, see Inline. |
|
|
ICONLINE |
Lines - Displays a preview of each process and instrument line type. For more information, see Lines. |
|
|
ICONLINK |
Links - Specifies and places a drawing link symbol, and displays a preview of the selected link. For more information, see Links. |
|
|
ICONLOGIC |
Logic - Specifies and places a logic instrument type and displays a preview of the selected instrument. For more information, see Logic. |
|
|
ICONMISC |
Miscellaneous - Specifies and places a miscellaneous item, and displays a preview of the selected item. For more information, see Miscellaneous. |
|
|
ICONNOZZLE |
Nozzles - Specifies and places a nozzle, and displays a preview of the selected nozzle. For more information, see Nozzles. |
|
|
ICONOTHERVALVE |
Valve-Other - Specifies and places a miscellaneous valve, and displays a preview of the selected valve. For more information, see Valve-Other . |
|
|
ICONOTHERVALVEF |
Valve-Other Flanged - Specifies and places a miscellaneous flanged valve, and displays a preview of the selected valve. For more information, see Valve-Other Flanged. |
|
|
ICONOTHERVALVESW |
Valve-Other Socket Weld - Specifies and places a miscellaneous socket-welded valve, and displays a preview of the selected valve. For more information, see Valve-Other Socket Weld. |
|
|
ICONPILOT |
Pilot - Specifies and places a pilot instrument type and displays a preview of the selected instrument. For more information, see Pilot. |
|
|
ICONPUMP |
Pumps - Specifies and places a pump, and displays a preview of the selected tank. For more information, see Pumps. |
|
|
ICONREDUCER |
Reducing - Specifies and places a reducer, and displays a preview of the selected reducer. For more information, see Reducing. |
|
|
ICONREGVALVE |
Valve-Regular - Specifies and places a regular valve, and displays a preview of the selected valve. For more information, see Valve-Regular. |
|
|
ICONREGVALVEF |
Valve-Regular Flanged - Specifies and places a regular flanged valve, and displays a preview of the selected valve. For more information, see Valve-Regular Flanged. |
|
|
ICONREGVALVESW |
Valve-Regular Socket Weld - Specifies and places a regular socket-welded valve, and displays a preview of the selected valve. For more information, see Valve-Regular Socket Weld. |
|
|
ICONSHARED |
Shared - Specifies and places a shared instrument type and displays a preview of the selected instrument. For more information, see Shared. |
|
|
ICONTANK |
Tanks - Specifies and places a tank, and displays a preview of the selected tank. For more information, see Tanks. |
|
|
ICONVESSEL |
Vessels - Specifies and places a vessel, and displays a preview of the selected vessel. For more information, see Vessels. |
|
|
INSTRUMENT |
Instrument - Draws an instrument line. For more information, see Instrument. |
|
|
LARGEARROW |
Larger - Places a large-sized arrow on the next vertex of the selected process line. For more information, see Large (Arrows). |
|
|
LARGETEXT |
Large - Places large-sized text on the drawing. For more information, see Large (Text). |
|
|
LAYERCHANGE |
Change Layer - Changes an object’s layer to the layer associated with another object that you select. For more information, see Change Layer. |
|
|
LAYERDELETE |
Delete Layer - Removes all of the entities on the layer associated with an entity that you select. For more information, see Delete Layer. |
|
|
LAYERISOLATE |
Isolate Layer - Turns off all layers except for the layer associated with an entity that you select. For more information, see Isolate Layer. |
|
|
LAYEROFF |
Layer Off - Turns off the layer associated with an entity that you select. For more information, see Layer Off. |
|
|
LAYERON |
On - Turns a layer back on that was turned off with the Layer Off command. For more information, see Layer On. |
|
|
LAYERSET |
Set Layer - Sets the current layer to that of an object that you select. For more information, see Set Layer. |
|
|
LAYERUNISO |
Un-isolate Layer - Turns all of the layers back on that were turned off with the Isolate Layer command. For more information, see Un-Isolate Layer. |
|
|
LINENUMBER |
Line Number Setup - Specifies the process line numbering configuration. For more information, see Line Number Setup. |
|
|
LOAUXBACK |
Logic-Auxiliary Back - Places an auxiliary back logic instrument. For more information, see Logic-Auxiliary Back. |
|
|
LOAUXFRONT |
Logic-Auxiliary Front - Places an auxiliary front logic instrument. For more information, see Logic-Auxiliary Front. |
|
|
LOLOCAL |
Logic-Local - Places a local logic instrument. For more information, see Logic-Local. |
|
|
LOOPNUMBER |
Loop Numbering - Specifies the instrument loop numbering configuration or template. For more information, see Loop Numbering. |
|
|
LOPRIBACK |
Logic-Primary Back - Places a primary back logic instrument. For more information, see Logic-Primary Back. |
|
|
LOPRIFRONT |
Logic-Primary Front - Places a primary front logic instrument. For more information, see Logic-Primary Front. |
|
|
MAINASSIGN |
Main Assign - Assigns the main size to the selected components. For more information, see Main Assign. |
|
|
MAKEGROUP |
Make Group - Creates a new component by grouping other components. For more information, see Make Group. |
|
|
MAPEDIT |
Map Edit Setup - Associates attributes in blocks (symbols) with table columns in the database. |
|
|
MATCH |
Match Layer - Changes an object’s properties to match those of another object that you select. For more information, see Match Layer. |
|
|
MATCHID |
Match Identification - Identifies and matches vessel and mechanical equipment. For more information, see Match Identification. |
|
|
MECHLINK |
Mechanical - Draws a logic mechanical link line. For more information, see Mechanical. |
|
|
MEDIUMARROW |
Medium - Places a medium-sized arrow on the next vertex of the selected process line. For more information, see Medium (Arrows). |
|
|
MEDIUMTEXT |
Medium - Places medium-sized text on the drawing. For more information, see Medium (Text). |
|
|
MENDLINE |
Mend Line - Mends process and instrument lines by removing gaps between the lines. For more information, see Mend Line. |
|
|
MENUSYMBOL |
Menu Symbols - Creates and modifies symbols. For more information, see Menu Symbols. |
|
|
MPRIMARY |
Major Primary - Draws a major primary process line. For more information, see Major Primary. |
|
|
MSECOND |
Major Secondary - Draws a major secondary process line. For more information, see Major Secondary. |
|
|
NPRIMARY |
Minor Primary - Draws a minor primary process line. For more information, see Minor Primary. |
|
|
NSECOND |
Minor Secondary - Draws a minor secondary process line. For more information, see Minor Secondary. |
|
|
PIAUXFRONT |
Pilot-Auxiliary Front - Places an auxiliary front pilot instrument. For more information, see Pilot-Auxiliary Front. |
|
|
PIDCHECKINOUT |
Check In / Out Manager - Checks in drawings from a source project folder to a destination project folder. For more information, see Check In / Check Out Manager. |
|
|
PIDEXPORT |
Export - Exports component data for one or more drawings to an .xls file. For more information, see Export. |
|
|
PIDINHERITANCESETUP |
Inheritance Setup - Specifies the database values inherited from a process line when an in-line component is inserted. For more information, see Inheritance Setup. |
|
---- |
PIDINHERITANCEUPDATE |
Updates the database for the Valves, Reducers, and Misc newly attached to a process line. |
|
|
PIDMATCHPROP |
Match Properties - Copies the properties of one component to another component. For more information, see Match Properties. |
|
|
PIDMATCHPROPWITHTAG |
Match Prop With Tag - Copies the properties and tag of one component to another component. For more information, see Match Prop with Tag. |
|
|
PIDMEDIT |
Multiple Edit - Modifies multiple components. For more information, see Multiple Edit. |
|
|
PIDNUMBER- |
Decrement - Decreases the line number count value by one. For more information, see Decrement. |
|
|
PIDNUMBER+ |
Increment - Increases the line number count value by one. For more information, see Increment. |
|
|
PIDNUMBERCOUNT |
Count - Sets the line number count value. For more information, see Count. |
|
|
PIDOPEN |
File Manager - Creates and manages projects and drawing files. For more information, see File Manager. |
|
|
PIDREPLACEBLOCK |
Replace Block - Replaces a block (symbol) with a new one. For more information, see Replace Block. |
|
|
PIDSORT |
Sort - Sorts valves according to their location on a specific process line. For more information, see Sort. |
|
|
PIDTITLEBLOCKMANAGER |
Title Block Manager - Updates the title blocks of drawing files in the project. For more information, see Title Block Manager. |
|
---- |
PIDUPDATEBLOCKFROMDB |
Updates all drawing files in the current project folder with block names from the database if they are different. |
|
|
PIDUPDATEDBDWG |
Block Manager - Changes the block or layer name of a component. For more information, see Block Manager. |
|
---- |
PIDUPDATEDWGFROMDB |
Updates the drawing from the database for the current project. |
|
---- |
PIDUPDATELAYERFROMDB |
Updates all drawing files in the current project folder with layer names from the database if they are different. |
|
---- |
PIDWRITEALLTODB |
Updates all the database tables for all the drawing files in the current project directory. |
|
---- |
PIDWRITEBLOCKTODB |
Writes block names of the components into the database for each drawing in the current project. |
|
---- |
PIDWRITECOORDINATESTODB |
Writes coordinates of the components into the database for each drawing in the current project. |
|
---- |
PIDWRITELAYERTODB |
Writes layer names of the components into the database for each drawing in the current project. |
|
|
PILOCAL |
Pilot-Local - Places a local pilot instrument. For more information, see Pilot-Local. |
|
|
PIPRIFRONT |
Pilot-Primary Front - Places a primary front pilot instrument. For more information, see Pilot-Primary Front |
|
|
PNEUMATIC |
Pneumatic - Draws a pneumatic line. For more information, see Pneumatic. |
|
|
PNEUMATICBIN |
Binary Pneumatic - Draws a binary pneumatic line. For more information, see Binary Pneumatic. |
|
|
PROCESSASSIGN |
Process Assign - Changes the type of a process line. For more information, see Process Assign. |
|
|
REDASSIGN |
Reduction Assign - Assigns the reduction size to the selected components. For more information, see Reduction Assign. |
|
|
REMOVEITEM |
Remove Line Item - Removes a valve component that is associated with a process line. For more information, see Remove Line Item. |
|
|
RENAMEDWG |
Rename Drawing - Renames the current drawing. For more information, see Rename Drawing. |
|
|
SETUP |
Setup - Specifies drawing settings. For more information, see Setup. |
|
|
SETVISIBILITY |
Set Visibility - Controls visibility of symbols. For more information, see Set Visibility. |
|
|
SHAUXBACK |
Shared-Auxiliary Back - Places an auxiliary back shared instrument. For more information, see Shared-Auxiliary Back. |
|
|
SHAUXFRONT |
Shared -Auxiliary Front - Places an auxiliary front shared instrument. For more information, see Shared-Auxiliary Front. |
|
|
SHLOCAL |
Shared-Local - Places a local shared instrument. For more information, see Shared-Local. |
|
|
SHPRIBACK |
Shared-Primary Back - Places a primary back shared instrument. For more information, see Shared-Primary Back. |
|
|
SHPRIFRONT |
Shared-Primary Front - Places a primary front shared instrument. For more information, see Shared-Primary Front. |
|
|
SIZEDLG |
Size Set - Specifies main and reduction sizes. For more information, see Size Set. |
|
|
SMALLARROW |
Small - Places a small-sized arrow on the next vertex of the selected process line. For more information, see Small (Arrows). |
|
|
SMALLTEXT |
Small - Places small-sized text on the drawing. For more information, see Small (Text). |
|
|
SONIC |
Sonic Guided - Draws a sonic guided line. For more information, see Sonic Guided. |
|
|
SONICUN |
Sonic Un-Guided - Draws a sonic un-guided line. For more information, see Sonic Un-guided. |
|
|
SPECASSIGN |
Spec Assign - Assigns the specification to an existing component. For information, see Spec Assign. |
|
---- |
SPECASSIGNTOGGLE |
Spec Assign Toggle - When turned on, tags are automatically updated when you change the spec. |
|
|
SPECDLG |
Spec Set - Specifies a drawing specification. For more information, see Spec Set. |
|
|
SPECEDIT |
Editor - Modifies the delivered specifications, and creates new specifications. For information, see Spec Editor. |
|
|
SPECOPTION |
Optional Items - Places a component on the drawing when the component type in the specification has an optional component. For more information, see Optional Items. |
|
|
SYNC |
Synchronize - Checks all components in the drawing and updates their attributes to the current values in the database. For more information, see Synchronize. |
|
SYNCSILENT |
Synchronize Silent - Updates component attributes to the current values in the database without prompts. For more information, see Synchronize. |
|
|
|
SYSLINK |
System - Draws a logic system link or data link line. For more information, see System. |
|
|
TABLESETUP |
Table Setup - Specifies the database structure for a new database project. For more information, see Table Setup. |
|
|
TAGNUMBER |
Tag Line - Adds a process line tag to the drawing. For more information, see Tag Line. |
|
|
TEXTCORRECT |
Text Correction - Modifies a text attribute of a block. For more information, see Text Correction. |
|
|
TRANSDOC |
Transport Documents - Copies files associated with components to a folder in the project folder. For more information, see Transport Documents. |
|
|
TYPEASSIGN |
Types Assign - Assigns a component type to one or more existing components. For information, see Type Assign. |
|
|
UNCOMBINEINST |
Un-Combine Instruments - Removes instruments from a group. For more information, see Un-Combine Instruments. |
|
|
UNCOMBINELINE |
Un-Combine Lines - Separates a process line into line segments. For more information, see Un-Combine Lines. |
|
|
UNDEFINED |
Undefined - Draws an undefined line. For more information, see Undefined. |
|
|
UPDATEPROCESS |
Update Process - Updates all needed process lines in the database from the old value of Tag for a component to the new value. For more information, see Update Process . |
|
|
VIEWLINE |
View Line Numbers - Displays all line numbers and their drawings. For more information, see View Line Numbers. |
|
|
XDATAADD |
Add Xdata - Imports existing P&ID drawings, symbols, and geometry. For more information, see Add Xdata. |
|
|
XDATAREMOVE |
Remove Xdata - Removes external database attributes from a component. For more information, see Remove Xdata. |
Command
