Assign gaskets and bolts to flange weld neck in the catalog - CADWorx - Help

CADWorx Equipment

Language
English
Product
CADWorx
Subproduct
Equipment
Search by Category
Help
CAESAR II Version
12
CADWorx Version
20.0 (2020)
CADWorx Structure Version
2020(4.0)
  1. Expand Flanges, and then expand Flange Weld Neck.

    You can also create a new flange data table, and then assign the Applicable Bolts and Applicable Gaskets value while creating that flanged data table. You must have a value in the Selection Code of the gasket and bolt data tables before you can select a value for the Applicable Gaskets or Applicable Bolts list. If you need to create a new data table, see Add a new data table to a category, or Add a new data table to a group folder.

  2. Click FLG_WN_150.

  3. In Properties, select GAS_150 from the Applicable Gaskets list.

  4. In Properties, select BLT_150 from the Applicable Bolts list.

  5. Click FLG_WN_150A.

  6. In Properties, select GAS_150A from the Applicable Gaskets list.

  7. In Properties, select BLT_150A from the Applicable Bolts list.

  8. Click FLG_WN_150B.

  9. In Properties, select GAS_150B from the Applicable Gaskets list.

  10. In Properties, select BLT_150B from the Applicable Bolts list.

  11. Click File > Save.

Next, Set selection codes on gasket and bolt components in the project.