Box - CADWorx - Help

CADWorx Equipment

Language
English
Product
CADWorx
Subproduct
Equipment
Search by Category
Help
CAESAR II Version
12
CADWorx Version
20.0 (2020)
CADWorx Structure Version
2020(4.0)

Mouse Icon Toolbar: EQP Box ICON

Specifies the parameters of the box.

Description

Specifies an alphanumeric description for the component. This description is visible even when the component is collapsed in the grid.

Dimension basis

Specifies either the inside or outside dimension. Select the dimension type from the list.

Length

Specifies the distance from the starting point to the ending point of the component.

Width

Specifies the component width.

Height

Specifies the component height.

Thickness

Specifies the component thickness.

Start offset X

Specifies an offset distance along the box X-axis. This value is applied at the start point of the box.

Start offset Y

Specifies an offset distance along the box Y-axis. This value is applied at the start point of the box.

End offset X

Specifies an offset distance along the box Y-axis of the box. This value is applied at the end point of the box.

End offset Y

Specifies an offset distance along the box Y-axis. This value is applied at the end point of the box.

Rotation angle

Specifies a box rotation angle.

Insulation

Displays the Insulation dialog box. For more information, see Insulation Dialog Box.