Assign gaskets and bolts to the flange in the project - CADWorx - Help

CADWorx Equipment

Language
English
Product
CADWorx
Subproduct
Equipment
Search by Category
Help
CADWorx Version
20.2
CADWorx Structure Version
4.2
  1. Expand Flanges. If you are not in the 150 specification, double-click to open it, and then expand Flanges.

  2. Click FLG WELD NECK, 150LB, SCH XS, ASTM A105.

  3. In the Edit component pane, select GAS_150 from the Applicable Gaskets list and BLT_150 from the Applicable Bolts list.

  4. Click Apply.

  5. Click FLG WELD NECK, 150LB, SCH XS, ASTM A105 Part A

  6. In the Edit component pane, reselect FLG_WN_150 from the Data Table list.

    The Applicable Gaskets and Applicable Bolts boxes populate.

  7. In the Edit component pane, add GAS_150A from the Applicable Gaskets list and BLT_150A from the Applicable Bolts list.

  8. Click Apply.

  9. Click FLG WELD NECK, 150LB, SCH XS, ASTM A105 Part B.

  10. In the Edit component pane, select GAS_150 and GAS_150B in the Applicable Gaskets list.

  11. Select BLT_150A and BLT_150B in the Applicable Bolts list.

  12. Click Apply.

  13. Click FLG WELD NECK, 150LB, SCH XS, ASTM A105 Part C.

  14. In the Edit component pane, type GAS_150, GAS_150A, and GAS_150B in the Applicable Gaskets list.

  15. Then, type BLT_150, BLT_150A, and BLT_150B in the Applicable Bolts list.

    The Applicable Gaskets and Applicable Bolts boxes populate.

  16. Click Apply.

  17. Click File > Save.

Next, Assign gaskets and bolts to valves in the project.