CADWorx Equipment Library Editor Home: Primitive Shapes
The Primitive Shape Manager can be used to customize basic shapes for use in the library. Each shape has variable geometry that you can adjust to change size and shape.
In addition to the variable values, custom data can be added to each shape.
Circular Cylinder
You can change the values listed below:
Dimension:
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Elliptical Head
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Flip Orientation |
Set the flip orientation to Yes or No. |
Head Factor |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Torispherical Head
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Crown Radius |
Enter a value for the dimension. |
Knuckle Radius |
Enter a value for the dimension. |
Flip Orientation |
Set the flip orientation to Yes or No. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Hemispherical Head
You can change the values listed below:
Dimensions:
Straight Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Flip Orientation |
Set the flip orientation to Yes or No. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Circular Cone
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Large Diameter |
Enter a value for the dimension. |
Small Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Concentric |
Set the value to Yes or No. |
Shell Section |
Set the value to Yes or No. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Body Flange
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Flip Orientation |
Set the value to Yes or No. |
Face Flange ID |
Enter a value for the dimension. |
Face Flange OD |
Enter a value for the dimension. |
Face Flange Thickness |
Enter a value for the dimension. |
Gasket ID |
Enter a value for the dimension. |
Gasket OD |
Enter a value for the dimension. |
Gasket Thickness |
Enter a value for the dimension. |
Flange ID |
Enter a value for the dimension. |
Flange OD |
Enter a value for the dimension. |
Flange Thickness |
Enter a value for the dimension. |
Large Hub Thickness |
Enter a value for the dimension. |
Small Hub Thickness |
Enter a value for the dimension. |
Hub Length |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Skirt
You can change the values listed below:
Dimensions:
Dimensions not applicable to the component type are not shown.
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Basering Type |
Select a basering type. |
Base Diameter |
Enter a value for the dimension. |
Basering ID |
Enter a value for the dimension. |
Basering OD |
Enter a value for the dimension. |
Bottom Plate Thickness |
Enter a value for the dimension. |
Number of Bolts |
Enter a quantity. |
Gusset Height |
Enter a value for the dimension. |
Gusset Width |
Enter a value for the dimension. |
Gusset Thickness |
Enter a value for the dimension. |
Rotation Angle |
Enter a value for the dimension. |
Distance Between Gussets |
Enter a value for the dimension. |
Top Plate Radial Width |
Enter a value for the dimension. |
Top Plate Thickness |
Enter a value for the dimension. |
Top Plate Width |
Enter a value for the dimension. |
Basering Diameter |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Stiffening Ring
You can change the values listed below:
Dimensions:
Distance |
Enter a value for the dimension. |
Ring Type |
Select a ring type. |
Ring Location |
Select Inside Diameter (ID) or Outside Diameter(OD) of the component. |
Inside Diameter |
Enter a value for the dimension. |
Outside Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Initial Flip |
Select Yes or No. |
Member Rotation Angle |
Select the rotation angle from 0, 90, 180, or 270. |
Member Steel Section |
Enter a value or use the Select Steel Member Dialog. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Platform
You can change the values listed below:
Dimensions:
Distance Offset |
Enter a value for the dimension. |
Platform Start Angle |
Enter a value for the dimension. |
Platform End Angle |
Enter a value for the dimension. |
Platform Width |
Enter a value for the dimension. |
Walking Plate Thickness |
Enter a value or use the Select Steel Member Dialog. |
Platform Vessel Clearance |
Enter a value for the dimension. |
Ladder Included? |
Set the value to Yes or No. |
Ladder Bottom Elevation |
Enter a value for the dimension. |
Ladder Top Elevation |
Enter a value for the dimension. |
Ladder Cage Included? |
Set the value to Yes or No. |
Ladder Layout Angle |
Enter a value for the dimension. |
Ladder Vessel Clearance |
Enter a value for the dimension. |
Ladder Platform Clearance |
Enter a value for the dimension. |
Ladder Alignment |
Select a ladder alignment value. |
Ladder Steel |
Enter a value or use the Select Steel Member Dialog. |
Ladder Rungs Steel |
Enter a value or use the Select Steel Member Dialog. |
Platform Type |
Select a platform type. |
Handrail Top Steel |
Enter a value or use the Select Steel Member Dialog. |
Handrail Top Steel |
Enter a value or use the Select Steel Member Dialog. |
Handrail Intermediate Steel |
Enter a value or use the Select Steel Member Dialog. |
Handrail Bottom Steel |
Enter a value or use the Select Steel Member Dialog. |
Handrail Post Steel |
Enter a value or use the Select Steel Member Dialog. |
Ladder Hoops Steel |
Enter a value or use the Select Steel Member Dialog. |
Ladder Cage Bars Steel |
Enter a value or use the Select Steel Member Dialog. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Saddle
You can change the values listed below:
Dimensions:
Distance |
Enter a value for the dimension. |
Width |
Enter a value for the dimension. |
Height |
Enter a value for the dimension. |
Contact Angle |
Enter a value for the dimension. |
Plate Thickness |
Enter a value for the dimension. |
Wear Pad Width |
Enter a value for the dimension. |
Wear Pad Thickness |
Enter a value for the dimension. |
Wear Pad Contact Angle |
Enter a value for the dimension. |
Base Plate Length |
Enter a value for the dimension. |
Base Plate Width |
Enter a value for the dimension. |
Number of Ribs |
Enter a value for the dimension. |
Rib Thickness |
Enter a value for the dimension. |
Web Thickness |
Enter a value for the dimension. |
Web Location |
Select a web location. |
Bolts |
Click the () icon to open the Bolt Detail Manager. |
Layout Angle |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Lugs
You can change the values listed below:
Dimensions:
Distance |
Enter a value for the dimension. |
Lug Type |
Select the lug type. |
Number of Lugs |
Enter a value for the dimension. |
Rotation Angle |
Enter a value for the dimension. |
Gusset Height |
Enter a value for the dimension. |
Gusset Width |
Enter a value for the dimension. |
Distance Between Gussets |
Enter a value for the dimension. |
Gusset Thickness |
Enter a value for the dimension. |
Bottom Plate Radial Width |
Enter a value for the dimension. |
Bottom Plate Length |
Enter a value for the dimension. |
Bottom Plate Thickness |
Enter a value for the dimension. |
Top Plate Radial Width |
Enter a value for the dimension. |
Top Plate Length |
Enter a value for the dimension. |
Top Plate Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Legs
You can change the values listed below:
Dimensions:
Number of Legs |
Enter a value for the dimension. |
Distance |
Enter a value for the dimension. |
Leg Length |
Enter a value for the dimension. |
Member Offset |
Enter a value for the dimension. |
Rotation Angle |
Enter a value for the dimension. |
Member |
Enter a value or use the Select Steel Member Dialog. |
Member Rotation Angle |
Enter a value for the dimension. |
Base Plates |
Select if there are base plates. |
Base Plate Offset |
Enter a value for the dimension. |
Base Plate Length |
Enter a value for the dimension. |
Base Plate Width |
Enter a value for the dimension. |
Base Plate Rotation Angle |
Enter a value for the dimension. |
Base Plate Member |
Enter a value or use the Select Steel Member Dialog. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Impeller
You can change the values listed below:
Dimensions:
Impeller Width |
Enter a value for the dimension. |
Impeller Diameter |
Enter a value for the dimension. |
Extension Diameter |
Enter a value for the dimension. |
Extension Length |
Enter a value for the dimension. |
Flip Orientation |
Select Yes or No. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Shaft
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Diameter |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Coupling
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Diameter |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Motor
You can change the values listed below:
Dimensions:
Cylinder Length |
Enter a value for the dimension. |
Cylinder Radius |
Enter a value for the dimension. |
Shaft Length |
Enter a value for the dimension. |
Shaft Diameter |
Enter a value for the dimension. |
Flip Orientation |
Select Yes or No. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Rectangular Solid
You can change the values listed below:
Dimensions:
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Length |
Enter a value for the dimension. |
Width |
Enter a value for the dimension. |
Height |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Start Offset Y |
Enter a value for the dimension. |
Start Offset Z |
Enter a value for the dimension. |
End Offset Y |
Enter a value for the dimension. |
End Offset Z |
Enter a value for the dimension. |
Rotation Angle |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Pump Base
You can change the values listed below:
Dimensions:
Length |
Enter a value for the dimension. |
Width |
Enter a value for the dimension. |
Height |
Enter a value for the dimension. |
Start X |
Enter a value for the dimension. |
Start Y |
Enter a value for the dimension. |
Start Z |
Enter a value for the dimension. |
Plane |
Select a plane. |
Rotation Angle |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Circular Torus
You can change the values listed below:
Dimensions:
Torus Diameter |
Enter a value for the dimension. |
Turn Radius |
Enter a value for the dimension. |
Turn Angle |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Rotation Angle |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Eccentric Pyramid
You can change the values listed below:
Dimensions:
Large Width |
Enter a value for the dimension. |
Large Depth |
Enter a value for the dimension. |
Small Width |
Enter a value for the dimension. |
Small Depth |
Enter a value for the dimension. |
Length |
Enter a value for the dimension. |
Width Offset |
Enter a value for the dimension. |
Depth Offset |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Hexagonal Solid
You can change the values listed below:
Dimensions:
Height |
Enter a value for the dimension. |
Width |
Enter a value for the dimension. |
Length |
Enter a value for the dimension. |
Face Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Octagonal Solid
You can change the values listed below:
Dimensions:
Depth |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Height |
Enter a value for the dimension. |
Width |
Enter a value for the dimension. |
Face Length |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Rectangular Torus
You can change the values listed below:
Dimensions:
Torus Width |
Enter a value for the dimension. |
Torus Height |
Enter a value for the dimension. |
Turn Radius |
Enter a value for the dimension. |
Turn Angle |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Rotation Angle |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Sphere
You can change the values listed below:
Dimensions:
Diameter |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Transition Element
You can change the values listed below:
Dimensions:
Depth |
Enter a value for the dimension. |
Width |
Enter a value for the dimension. |
Length |
Enter a value for the dimension. |
Diameter |
Enter a value for the dimension. |
Concentric |
Select Yes or No. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Triangular Solid
You can change the values listed below:
Dimensions:
Side 1 |
Enter a value for the dimension. |
Side 2 |
Enter a value for the dimension. |
Length |
Enter a value for the dimension. |
Angle |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Truncated Rectangular Prismatic Solid
You can change the values listed below:
Dimensions:
Large Depth |
Enter a value for the dimension. |
Large Width |
Enter a value for the dimension. |
Small Depth |
Enter a value for the dimension. |
Small Width |
Enter a value for the dimension. |
Length |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Wall Thickness |
Enter a value for the dimension. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |
Welded Flat Head
You can change the values listed below:
Dimensions:
Height |
Enter a value for the dimension. |
Diameter Basis |
Select if the diameter is measured on the inside (ID) or outside (OD) of the component. |
Diameter |
Enter a value for the dimension. |
Wall Thickness |
Enter a value for the dimension. |
Flip Orientation |
Set the value to Yes or No. |
Properties:
Name |
Assign or edit the name of the component. |
Long Description |
Assign or edit the long description of the component. |
Short Description |
Assign or edit the short description of the component. |
Tag |
Assign or edit the tag description of the component. |
Part Number |
Assign or edit the part number of the component. |
IFC Class |
Assign or edit the IFC Class of the component. |
Layer |
Select the layer of the component. |
Color |
Select the color of the component. |
Group |
Select the group of the component. |
Insulation Type |
Select the insulation type for the component. |
Refractory Type |
Select the refractory type for the component. |
Tracing Type |
Select the tracing type for the component. |
Material |
Select the material for the component. |
Custom Data:
Custom Data can be added with the following fields:
Name - Type a value for the Name. |
|
Title - Type a value for the Title. |
|
Description - Type a value for the Description. |
|
Data Type - Select a value for the Data Type. |
|
Inheritance Level - Select a value for the Inheritance Level. |
|
Default Value - Type a value for the Default Value. |