The Rect_FlatFlange sheet in the HVAC.xls workbook organizes facts for rectangular flat flanges.
PartNumber
Type the part number for the flange. An example is RECTFF for rectangular flat flange.
FaceDepth
Type the face depth for the coil.
FaceWidth
Type the face width for the coil.
ComponentType
Type the component type for the rectangular flat flange.
PartDescription
Type a description for the rectangular flat flange.
SymbolDefinition
Type the symbol definition for the rectangular flat flange.
Width
Type the width of the duct.
Depth
Type the depth of the duct.
Clearance
Type the clearance for the rectangular flat flange.
FlangeWidth
Type the width of the flange.
Thickness
Type the thickness for the flange.
CompressedGasket
Type the thickness for the compressed gasket.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Nozzle(i):CrossSection
Type the related CrossSection object for the port.
Nozzle(i):EndPrep
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Nozzle(i):Thickness
Type the thickness of the nozzle port.
Nozzle(i):FlangeWidth
Type the flange width for the nozzle.
Nozzle(i):FlowDirection
Type the flow direction for the nozzle.
Nozzle(i):PortDepth
Type the depth of the port for the nozzle.
Nozzle(i):CptOffset
Type the offset value for the component.