The RoundTee sheet in the HVAC.xls workbook defines the round tees that you want in the Catalog.
PartNumber
Type the part number for the round tee. An example is TA-100X80.
PartDescription
Type a description for the round tee.
FaceWidth
Type the face width of the damper for the round tee.
FaceDepth
Type the face depth of the damper for the round tee.
ComponentType
Type the component type for the round tee.
SymbolDefinition
Type the symbol definition for the round tee.
Width
Type the width of the duct.
BWidth
Type the width of the bend.
HLength
Type the length for the round tee.
BLength
Type the length of the bend.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Nozzle(i):CrossSection
Type the related CrossSection object for the port in the particular nozzle.
Nozzle(i):EndPrep
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Nozzle(i):Thickness
Type the thickness of the nozzle.
Nozzle(i):FlangeWidth
Type the flange width for the nozzle.
Nozzle(i):FlowDirection
Type the flow direction for the nozzle.
Nozzle(i):PortDepth
Type the depth of the port for the nozzle.
Nozzle(i):CptOffset
Type the offset value for the component.