The Rect_Sleeve sheet in the HVAC.xls workbook organizes facts for rectangular sleeves.
PartNumber
Type the part number for the sleeve. An example is RECTSLEEVE for rectangular sleeve.
Part numbers for rectangular sleeves must be unique throughout the entire Catalog.
FaceDepth
Type the face depth for the object.
FaceWidth
Type the face width for the object.
ComponentType
Type the component type for the rectangular sleeve.
PartDescription
Type a description for the rectangular sleeve.
SymbolDefinition
Type the symbol definition for the rectangular sleeve.
Width
Type the width of the duct.
Depth
Type the depth of the duct.
Clearance
Type the clearance for the rectangular sleeve.
Length
Type the length of the rectangular sleeve.
Thickness
Type the thickness for the sleeve.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Nozzle(i):EndPrep
Type the coded end preparation for the particular nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Nozzle(i):Thickness
Type the thickness of the nozzle port.
Nozzle(i):CrossSection
Type the related CrossSection object for the port.
Nozzle(i):FlangeWidth
Type the sleeve width for the nozzle.
Nozzle(i):FlowDirection
Type the flow direction for the nozzle.
Nozzle(i):PortDepth
Type the depth of the port for the nozzle.
Nozzle(i):CptOffset
Type the offset value for the component.