The Round_Sleeve sheet in the HVAC.xls workbook defines the round welds available in the Catalog.
PartNumber
Type the part number for the weld. An example is RoundWeld for round weld.
Part numbers for round sleeves must be unique throughout the entire Catalog.
FaceDepth
Type the face depth for the object.
FaceWidth
Type the face width for the object.
ComponentType
Type the component type for the round weld.
PartDescription
Type a description for the round weld.
SymbolDefinition
Type the symbol definition for the round weld.
Width
Type the width of the duct.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Nozzle(i):CrossSection
Type the related CrossSection object for the port.
Nozzle(i):EndPrep
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Nozzle(i):Thickness
Type the thickness of the nozzle port.
Nozzle(i):FlangeWidth
Type the sleeve width for the nozzle.
Nozzle(i):FlowDirection
Type the flow direction for the nozzle.
Nozzle(i):PortDepth
Type the depth of the port for the nozzle.
Nozzle(i):CptOffset
Type the offset value for the component.